China OEM Retractable Electrical Cord Service – Mobile Retractable Cable Reel Retractable SK-DXW09 Series Cable Reel – Quanyou Electric

product description

Flame retardant and plug-resistant socket, overheat protector, LED power indicator, safety door socket 250V~16A three-hole socket 1, 250V~10A five-hole socket 3 integrated sockets, extend the number of plugging and unplugging, increase the use Anti-electric shock protection door can only be used when both holes are inserted together to protect the safety of people and equipment.

Wiring Requirements and Procedures
1. Try to choose a flexible cable with the type and specification shown in the table above. 2. The cable is equipped with a junction box, open the junction box cover, unscrew the screw of the wire clamp, and then insert the stripped cores into the corresponding polarities. In the terminal hole, tighten the crimping screw of the terminal; press the cable into the crimping piece, and tighten the crimping piece screw; press the cable into the square groove of the reel reel, cover the junction box cover, and tighten the cover plate screw

o Output power is fully reeled and fully extended cable power
When the wire of the reel is rolled up, a coil is formed, which consumes electrical power and generates heat during power transmission. It is recommended not to reel when using it.
①Cable reel cable length can be customized according to customer needs
①Please pull out all the cables when using, otherwise the curled cables will generate resistance due to heat generation, and the withstand power will be halved o When using the cable reel, the total power of the electrical appliance must not be overloaded, otherwise it may cause a fire hazard

technical parameter

Precautions
1. First put the cable reel in a place where it is not easy to get wet, safe and free of debris, pull out the cable, and insert the plug into the power supply. The indicator light of the cable reel is on to indicate that the power is on and can be used normally; if the indicator light is not on , you can try to press the manual reset red button of the thermal protector and check whether the switch of the leakage protector reaches the ON position.
2. Thermal protector: When the temperature in the reel reaches 56±5℃, the thermal protector button will automatically pop up to cut off the power.
The cause of the temperature increase may be excessive load or other reasons. Before resuming use, please check and confirm that the factors causing the temperature rise have been eliminated, and when the reel returns to normal temperature, press the manual reset button of the thermal protector, and the indicator light is on.